This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996 coupe. The new 846 r1035 features water-jet machined aluminum construction much like our 846 r1025 harness truss. Like all brey-krause harness mounts, the 846 r1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.
Wrap around installation of the belts.

The 846 r1035 been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicle seat ...(choose a part on the right to read more)

General Fitment

Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9078 secures GT3 seats to Boxster / 996/997 sliders
Installation: repositions GT3 seats 1" lower when mounted to factory sliders.
Miscellaneous: 846 r907x series seat mount kits provide an inboard seat belt mount.

Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, GT2 (08-09), turbo (07-09), Carrera 4s, 261kw (05-08), Carrera 4, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 ...(choose a part on the right to read more)

General Fitment

This kit adapts the 846 r1030 and 846 r1035 harness mounts to fit in the 996 GT2 and GT3. It features new strut tubes that are designed to go to the forward lap belt mounts, as these cars lack rear seat belt mounting points.

This kit bolts in to your GT2 or GT3 with no drilling, cutting or fabricating necessary.

Fits: GT3 rs, 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), turbo (07-09), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05)

General Fitment

Material: typ 304, aus rostfreiem stahl.
Oberfläche: pulverbeschichtet in schwarz
Gewicht: 4 lbs.
Modelle: modell 846r9080 ermöglicht den einbau des Porsche GT3 sitzes auf der fahrerseite. Modell 846r9081-ermöglicht den einbau des Porsche GT3 sitzes auf der beifahrerseite
Installation: für den einbau der GT3 sitze in 996/997/Boxster für direkte boden-montage wird noch zusätzlich 846r9042( adapter) benötigt.
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation:...(choose a part on the right to read more)

General Fitment

This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996 coupe. The new 846 r1035 features water-jet machined aluminum construction much like our 846 r1025 harness truss. Like all brey-krause harness mounts, the 846 r1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.

The 846 r1035 been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicle seat belt anchorages-performance requirements...(choose a part on the right to read more)

General Fitment

Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9772 secures recaro spg xl seats to Boxster / 996/997 sliders
Installation: repositions recaro spg xl seats 1" lower when mounted to factory sliders.
Miscellaneous: 846 r907x series seat mount kits provide an inboard seat belt mount.

Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, GT2 (08-09), turbo (07-09), Carrera 4s, 261kw (05-08), Carrera 4, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05),...(choose a part on the right to read more)

General Fitment

Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9078 secures GT3 seats to Boxster / 996/997 sliders
Installation: repositions GT3 seats 1" lower when mounted to factory sliders.
Miscellaneous: 846 r907x series seat mount kits provide an inboard seat belt mount.

Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, GT2 (08-09), turbo (07-09), Carrera 4s, 261kw (05-08), Carrera 4, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 ...(choose a part on the right to read more)

General Fitment

Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846 r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation: adapts GT3 seats to 996/997/Boxster for direct floor mount with 846 r9042.
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846 r9042 adapter is required for installation. 846 r908x series seat mount kits provide an inboard seat belt mount. 846 r9031 optional anti-sub strap mount fo...(choose a part on the right to read more)

General Fitment

- material: 11 gauge, type 304, stainless steel.
- finish: powder coated in durable black wrinkle-finish.
- weight 4.5 lbs.
- models: model 846-r9755 recaro spg/spa seats for left side. Use 846-r9756 for right side.
- installation: adapts recaro spg/spa seats (including pro racer hans models) to 996/986 OEM manual sliders & OEM GT3 sliders or bk's 846 r9044 fixed floor mount assembly.

Miscellaneous: 846-r9755 provides an inboard seat belt mount.

Fits: GT3 rsr (04-), GT3 r/rs (99-03), GT3-cup (98-04), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03...(choose a part on the right to read more)

General Fitment

Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846 r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation: adapts GT3 seats to 996/997/Boxster for direct floor mount with 846 r9042.
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846 r9042 adapter is required for installation. 846 r908x series seat mount kits provide an inboard seat belt mount. 846 r9031 optional anti-sub strap mount fo...(choose a part on the right to read more)

General Fitment

Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846r9080 secures Porsche model recaro spg xl to floor on driver's side.
Installation: adapts GT3 seats to 944,964,965,993 for direct floor mount
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846r9042 adapter is required for installation. R-908x series seat mount kits provide an inboard seat belt mount. 846r9031 optional anti-sub strap mount for 846r908x series.

Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-...(choose a part on the right to read more)

General Fitment

The harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev. Mar 95, motor vehicle seat belt anchorages-performance requirements.

The harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high g loads of cornering and braking.

Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

Strength requirements for ...(choose a part on the right to read more)

General Fitment

The bbi autosport Porsche 996 & 997 streetcup roll bar features a 2-piece design and 4130 chrome moly steel tubing (1.5" x .120" main hoop & 1.5" x 0.95" rear hoops) for excellent strength to weight ratio. Taking a sensible design approach, the 2-piece construction allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points), and still be compatible with the factory bose subwoofers. Other similar roll bars on the market are not compatible with the subwoofer. For superior strength and rigidity, the bar utilizes "x" braces on both front and rear sections and each joint has been meticulously tig welded by hand. Bolt-in installation is accomplished by usin...(choose a part on the right to read more)

In response to the many requests from Porsche drivers looking for a harness guide bar that would not only guide their driving harnesses, but allow them to mount their harnesses directly to the bar, we developed the “harness truss”. This harness truss has been tested and certified to handle types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicleseat belt anchorages- performance requirements. Strong, yet it weighs only a fraction of what a support of the same strength made from tubular or bar steel would weigh. The harness truss is precision water-jet machined for a perfect fit into Porsche factory mountin points. A mount really can’t be relied on un...(choose a part on the right to read more)

General Fitment

Brey-krause harness guide bars properly locate a racing shoulder harness relative to the driver. Harness guides also prevent excessive shifting and fatigue of the driver during the high g loads of cornering and braking. Brey-krause harness guide bars are carefully engineered to transfer these forces to factory supplied points that are designed to take the load. Superior materials and workmanship do the job while having an appearance worthy of a Porsche.
These bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way. You can bolt them in for a weekend auto cross or track event and quickly remove them for work on monday.

Material: type 304, stai...(choose a part on the right to read more)

General Fitment

Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace these belts due to an accident, or if you’re putting the factory GT3 seat setup into another car, you will want to use these belts.

They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which makes it much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.

General Fitment

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.

General Fitment

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.

General Fitment

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.

General Fitment

Known as: support for seatbelt / support seatbelt

View/Change Diagram

911 1974-77 - Body	911 1978-83 - Body
911 1984-86 - Body	911 1987-89 - Body
930 1975-77 - Body	911 1989-94 - Body

Known as: adapter / adapter seat-belt buckle / adapter mounting seat-belt buckle inner rear

View/Change Diagram

Boxster 1997-04 - Body	Boxster 1997-04 - Body
Boxster 1997-04 - Body	911 1998-05 - Body
911 Turbo/GT2 2001-05 - Body	911 GT3 2003-05 - Body